Precision, Experience, and Trust Since 1946


From aerospace to defense to medical solutions, partner with us to build what’s next.
Request a Quote

Over 75 Years of Excellence and Beyond​

Aerowind was founded as Peerless Manufacturing Company in 1946 by Stan Kousens (shown here load testing a handling fixture for the Standard Arm Missile). Mr. Kousens started his manufacturing training at the age of 12 when he was admitted to the Ford Trade School in 1925. Working his way up through both the Ford Motor Company and Crysler Corporation he left in 1940 to go to work for Fred Rohr as Chief of Tool Design at what was then Rohr Industries.

Our Mission

Aerowind’s mission is to become as efficient as possible in producing small to large precision machined parts and assemblies for all industries such as aerospace, electronics and general transportation. Our goal is to obtain work that will fit our machine capacity (100″ in 4 and 5 axes, 240″ in 3 axis configurations) and that will repeat in small, medium, and large lot sizes.

Our NC programmers are experts in the use of Unigraphics 5 axis software which has allowed Aerowind to manufacture some of the most complex components ever designed.

 The primary goal of our company is to produce and ship perfect parts 100% of the time. 

From F-15 to F-22: The Evolution of Propulsion with Vectoring Nozzles

This photo of a modified F15 Fighter Aircraft with Vectoring Nozzles (produced by Pratt & Whitney) was a prototype developed to test this advanced technology. Aerowind produced many of the components in the hot section of these nozzles. This technology was then utilized to design the Vectoring Nozzles that will be installed on the F-22 and Joint Strike Fighter Aircraft. The use of Vectoring Nozzles on fighter aircraft will improve their performance to the same degree that the jet engine added to propeller powered aircraft in the 1940’s.

Aerowind Precision for the MX Missile

Aerowind produced all the metal attachment fittings for this MX Missile Composite Payload Section designed and built by General Dynamics Convair.

Precision-Machined ISOGRID Jet Engine Duct for Rolls Royce

Aerowind pre-machined this ISOGRID Jet Engine Duct for Rolls Royce from flat titanium plate which was then roll formed into the configuration shown and finish machined after forming and welding

High-Strength Engine Mount for Boeing 717

This Engine Mount is manufactured from special high strength heat treated alloy steel for the new Boeing 717 Twin Engine Aircraft. The manufacturing procedures for this part are closely monitored by Aerowind personnel to ensure a finished product that is perfect every time.

Ultra-Lightweight Titanium Bulkhead

Ultra-Lightweight Titanium Bulkhead for Satellite Fuel Tank

This extremely lightweight titanium Bulkhead starts as a 24" diameter, 110-pound forging and is machined down to less than 1 pound with walls less than .020" thick. It is a Satellite Fuel Tank component and must be flat within .010" in the free state.

Standard Arm Missile Launcher Component

Standard Arm Missile Launcher Component

Manufactured from 7075 aluminum forging, this Standard Arm Missile Launcher component delivers high strength and precision for defense applications.

Tomahawk Cruise Missile Aft. Body

Tomahawk Cruise Missile Aft. Body

Machined from 2219 aluminum plate for strength and reliability.

Harpoon Missile Body Section

Harpoon Missile Body Section

Manufactured on Aerowind’s custom-designed internal mill for maximum accuracy.

Wing Plugs for Tomahawk Missiles

Wing Plugs for Tomahawk Missiles

Produced from 2219 aluminum plate, ensuring lightweight durability.

MD-11 Cargo Door Latch Assemblies

MD-11 Cargo Door Latch Assemblies

Precision machined from heat-treated 17-4PH stainless steel to secure heavy-duty operations.

High-Precision IC Feeding Device

High-Precision IC Feeding Device

This IC Feeding Device was expertly machined from 6061 aluminum plate, combining lightweight strength with exceptional precision. Engineered to support advanced industrial applications, it reflects Aerowind’s commitment to innovation and reliability in high-performance components

Ultra-High Speed Camera Housing

Ultra-High Speed Camera Housing

A precision-machined aluminum casting developed for a Kodak-designed ultra-high speed camera, showcasing Aerowind’s expertise in complex, high-accuracy components

Precision Assembly for Tomahawk Cruise Missile

Precision Assembly for Tomahawk Cruise Missile

Aerowind machined, welded, and assembled this unit from 6061 aluminum for the Tomahawk Cruise Missile program, delivering accuracy and durability for mission-critical defense systems

Our Vision

 

Our vision is to be a trusted global partner in precision machining, providing innovative and reliable solutions for all industries. We aim to set the standard for quality, efficiency, and excellence  shaping the future of aerospace, defense, medical, electronics, energy, and beyond.

 Shaping the future of aerospace, defense, medical, electronics, energy, and beyond.

What Makes Aerowind Different

For over 70 years, Aerowind has built a reputation for precision, innovation, and trust. From San Diego, we deliver advanced CNC solutions aligned with ISO9001 & AS9100D standards delivering the precision and reliability industries demand​
70 +

Since 1946– 70+ years of trusted expertise

San Diego Based

Ideal for West Coast logistics

Advanced CNC & CAD/CAM

Innovation in every project

ISO9001 & AS9100D

Aligned consistent, reliable processes

Contact Us

We would love to hear from you.
Feel free to reach out using the below details.

  • Address: 1959 John Towers Ave El Cajon, CA 92020
  • Hours: Mon-Fri 7:00AM - 3:30PM
  • Phone: 619-562-6090
  • Email: sales@aerowind.com
  • 619-562-6090
  • 1959 John Towers Ave, El Cajon, CA 92020
  • Mon-Fri 7:00AM - 3:30PM

© 2025 All Rights Reserved.